When WPA/WPA2-EAP is selected
PEAP/EAP-Fast PEAP-TLS/EAP-TLS LEAP
Sub Menu Function
EAP Method
Set the protocol for authentication.
PEAP: Authentication protocol widely used in Windows Server.
PEAP-TLS: Authentication protocol used in Windows Server. Set when using client certificate.
EAP-TLS: Authentication protocol widely used to use a client certificate.
EAP-Fast, LEAP: Select this when these authentication protocols are used.
User name
You can enter a user name to be used for authentication in single-byte alphanumeric characters (no spaces). You can enter up to 64 characters.
If you select PEAP-TLS or EAP-TLS, the user name obtained automatically from the client certificate is displayed. You can change the user name, if the
authentication server requires another user name.
You cannot enter more than 32 characters on the configuration menu. When setting from Web Control, you can enter more than 32 characters.
s p.109
If you must also enter the domain name, add the domain name before user name separated by a backslash.
Password
You can enter an authentication password in single-byte alphanumeric characters. You can enter up to 64 characters. When the password is entered and
the [Enter] button is pressed, the value is set and displayed as an asterisk (*).
You cannot enter more than 32 characters on the configuration menu. When setting from Web Control, you can enter more than 32 characters.
s p.109
Client Certificate
Issued to/Issued by/Validity period
Displays the information set in the stored client certificate. It is blank if the certificate is not set.
Network Menu
68
To Next Page
Loading...
