c
Select the grid color displayed when making adjustments from
Pattern Color.
(1) Select Pattern Color, and then press the [Enter] button.
(2) Select a combination of R (red), G (green), and B (blue) for the grid color.
R/G/B: Displays a combination all three colors; red, green and blue. The
actual color of the grid is white.
R/G: This is available when R is selected from Select Color. Displays a
combination of two colors; red and green. The actual color of the grid is
yellow.
G/B: This is available when B is selected from Select Color. Displays a
combination of two colors; green and blue. The actual color of the grid is
cyan.
(3) Press the [Esc] button to return to the previous screen.
d
Select Start Adjustments, and then press the [Enter] button.
When the message is displayed, press the [Enter] button again.
Adjustment starts. All four corners are adjusted in order starting at
the top left.
a
The image may become distorted while adjusting. The image is
restored once adjustments are complete.
e
Use the [h] button to make adjustments, and then press
the [Enter] button to move to the next adjustment point.
f
When you have adjusted all four corners, select Exit, and then
press the [Enter] button.
If you feel you still need to make adjustments after correcting all
four points, select Select intersection and adjust and then continue
making adjustments.
Projecting Images
43
To Next Page
Loading...
