Epson EB-Z8455WU - Changing the Aspect Mode (EB-Z10005;Z10000;Z8150); Projecting Images from Video Equipment

Aspect mode Input Signal
XGA
1024X768(4:3)
WXGA
1280X800(16:10)
SXGA
1280X1024(5:4)
16:9
16:9 (Up)
16:9 (Down)
Full
Zoom
Native
q
If parts of the image are missing or it cannot project everything, set
Wide or Normal in Resolution from the configuration menu
depending on the size of the computer panel. s p.53
Changing the Aspect Mode (EB-Z10005/Z10000/
Z8150)
Projecting images from video equipment
Each time the [Aspect] button on the remote control is pressed, the aspect
mode changes in the order Auto, 4:3, 16:9, 16:9 (Up), and 16:9 (Down).
s p.22
When inputting a 720p/1080i/1080p signal and the aspect mode is set to
4:3, a 4:3 zoom will be applied (the right and left sides of the image will be
cut off).
Example: 720p signal input (resolution: 1280x720, aspect ratio: 16:9)
A
Auto
B
4:3
C
16:9
D
16:9 (Up)
E
16:9 (Down)
Changing the Aspect Ratio of the Projected Image
25