EasyManua.ls Logo

Epson EcoTank ET-8500 Series - Scanned Image Problems

Epson EcoTank ET-8500 Series
284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
Place the original on the scanner glass and then place a piece of black paper over it.
& “Placing Originals” on page 39
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “Menu Options for Copying” on page 100
Multiple Originals are Copied onto a Single Sheet
The gap between originals is too small.
Solutions
When you place multiple originals on the scanner glass to copy them separately, but they are copied onto
a single sheet, place the originals at least 5 mm apart. If the problem continues, place one original at a
time.
& “Copying Photos” on page 105
Scanned Image Problems
Uneven Colors, Dirt, Spots, and so on Appear in the Scanned Image
There is dust or dirt on the originals or the scanner glass.
Solutions
Remove any dust or dirt that adheres to the originals, and clean the scanner glass.
& “Cleaning the Scanner Glass” on page 139
Solving Problems
>
Printing, Copying, and Scanning Quality is Poor
>
Scanned Image Problems
226

Table of Contents

Related product manuals