11.
Repeat steps 9 to 10 until all photos are placed.
12.
Select Next.
13.
Make the settings on the Basic Settings tab, and then set the number of copies.
“Menu Options for Paper and Print Settings” on page 52
14.
Select Advanced Settings tab, and then change the settings as necessary.
15.
Select Basic Settings tab, and then tap
x
.
Printing at ID Photo Size
You can print ID photos using data on a memory device. Two copies of one photo are printed at two dierent sizes,
50.8×50.8 mm and 45.0×35.0 mm, on 10×15 cm (4×6 in.) size photo paper.
1.
Load paper in the printer.
“Loading Paper” on page 34
2.
Insert a memory device into the SD card slot or the external interface USB port of the printer.
“Inserting and Removing a Memory Card” on page 42
“Inserting and Removing an External USB Device” on page 42
3.
Select Print Photos on the control panel.
4.
Select Collage > Print Photo ID.
5.
When a message telling you that loading photos is complete is displayed, select OK.
6.
Select
.
7.
Select the photo you want to print on the select photo screen, and then select Done.
Select Single View, and then select
to edit the photo if necessary.
“Menu Options for Editing Photos” on page 53
8.
Select Next.
Printing
>
Printing Photos
>
Printing Photos from a Memory Device
49
To Next Page
Loading...
