100
Observe the following when replacing the maintenance box:
• Do not drop the maintenance box or subject it to strong shocks.
• Do not replace the maintenance box during printing; otherwise, ink may leak.
• Do not remove the maintenance box or its cover except when replacing the maintenance box.
• If you cannot replace the cover, the maintenance box may not be installed correctly. Remove and
reinstall the maintenance box.
• Do not tilt the used maintenance box until after it is sealed in the plastic bag or ink may leak.
• Do not touch the openings in the maintenance box or you may get ink on you.
• Do not reuse a maintenance box that has been removed and left uninstalled for more than a week.
• Keep the maintenance box away from direct sunlight.
• Do not store the maintenance box in high or freezing temperatures.
1. Remove the new maintenance box from its package.
Caution: Do not touch the green chip on the maintenance box. Doing so may prevent normal
operation and printing.
2. Using a flat-tipped screwdriver, loosen the screw on the maintenance box cover and slide off the
cover as shown.
To Next Page
Loading...
