Epson EcoTank L8160 Series - Page 191

"!" is Displayed on the Screen and you Cannot Select Photos
The image le is not supported.
Solutions
"!" is displayed on the LCD screen when the image le is not supported by the product. Use les
supported by the product.
& “Supported Data
Specications
” on page 277
The le name is too long to be recognized by the printer.
Solutions
You can use the following solutions to print photos.
❏ Print from a computer
❏ Print from a smart device using Epson Smart Panel
You do not need to remove the memory card from your smart device.
Cannot Pinch in or Pinch out
Not enough pressure is being used when pressing on the screen.
Solutions
If you cannot pinch in or pinch out correctly, perform operations while pressing lightly on the screen.
Cannot Close the Scanner Unit
The scanner unit is designed to close slowly and resist a little as a precaution against
catching ngers.
Solutions
Continue to close even if you feel some resistance.
Solving Problems > The Printer Does Not Work as Expected > Cannot Operate the Printer as Expected
191