Epson EcoTank Pro M15180 Series - Power Turns off Automatically; Paper Does Not Feed Properly

Power Does Not Turn O
The P button was not pressed for long enough.
Solutions
Hold down the
P button for a little longer. If you still cannot turn o the printer, unplug the power cord.
To prevent the print head from drying out, turn the printer back on and turn it
o
by pressing the
P
button.
Power Turns
O
Automatically
The Power O Settings or Power O Timer feature is enabled.
Solutions
❏ Select Settings > General Settings > Basic Settings > Power O Settings, and then disable the Power
O
If Inactive and Power
O
If Disconnected settings.
❏ Select Settings > General Settings > Basic Settings, and then disable the Power O Timer Setting.
Note:
Your product may have the Power O Settings or Power O Timer feature depending on the location of purchase.
Paper Does Not Feed Properly
No Paper Feeds
e following causes can be considered.
The installation location is inappropriate.
Solutions
Place the printer on a
at
surface and operate in the recommended environmental conditions.
& “Environmental
Specications
” on page 272
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
& “Available Paper and Capacities” on page 236
& “Unavailable Paper Types” on page 239
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
& “Paper Handling Precautions” on page 31
Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed Properly
143