Epson EcoTank Pro M15180 Series - It Is Time to Replace the Maintenance Box; Maintenance Box Handling Precautions

Note:
If any ink remains in the ink bottle, tighten the cap and store the bottle upright for later use.
10.
Close the ink tank cover rmly.
11.
Follow the on-screen instructions to set the ink level.
c
Important:
Even if you do not rell ink up to the upper line on the ink tank, you can continue using the printer. To keep your
printer operating at its best, however, ll ink tank up to the upper line and reset the ink level immediately.
Related Information
& “Ink Bottle Code” on page 239
& “Ink Bottle Handling Precautions” on page 186
& “Cleaning Spilled ink” on page 126
It is Time to Replace the Maintenance Box
Maintenance Box Handling Precautions
Read the following instructions before replacing the maintenance box.
❏ Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
❏ Do not replace the maintenance box during printing; otherwise, ink may leak.
Solving Problems > It is Time to Replace the Maintenance Box > Maintenance Box Handling Precautions
190