Copy Quality is Poor
Banding Appears in Copies
The print head nozzles may be clogged.
Solutions
Use the Print Quality Adjustment feature. If you have not used the printer for a long time, the print head
nozzles may be clogged and ink drops may not be discharged.
& “Adjusting the Print Quality” on page 114
Black or Gray Banding Appears at Intervals of Approximately 3.3 cm
e
following causes can be considered.
The paper type setting does not match the paper loaded.
Solutions
Select the appropriate paper type setting for the type of paper loaded in the printer.
& “List of Paper Type” on page 32
The print head position is out of alignment.
Solutions
Align the print head using the Print Quality Adjustment feature.
& “Adjusting the Print Quality” on page 114
Solving Problems
>
Printing, Copying, and Scanning Quality is Poor
>
Copy Quality is Poor
199
To Next Page
Loading...
