Epson EcoTank Pro M15180 Series - Control Panel

Control Panel
A
Turns the printer on or o.
Unplug the power cable after checking that the power light is o.
B
Displays the home screen.
C
Logs o from the printer when Access Control is enabled.
When Access Control is disabled, this is also disabled.
D
Stores the output tray.
E
Pauses the current printing job and allows you to interrupt another job. However, you cannot interrupt a new job
from the computer.
Press this button again to restart a paused job.
F
Resets the current settings to user default settings. If user default settings have not been made, resets to the
factory default.
G
Displays the Job/Status menu. You can check the printer's status and job history.
The error light on the left ashes or turns on when an error occurs.
The data light on the right
ashes
when the printer is processing data. It turns on when there are queued jobs.
H
Displays the Paper Setting screen. You can select the paper size and paper type settings for each paper source.
I
Stops the current operation.
J
Displays menus and messages.
When no operations are performed for a specic length of time, the printer enters sleep mode and the display
turns o. Tap anywhere on the touch screen to turn on the display. Depending on the current settings, pressing
the buttons on the control panel wakes the printer from sleep mode.
K
Returns to the previous screen.
Guide to the Control Panel > Control Panel
23