Epson EcoTank Pro M15180 Series - Using Port for the Printer

Even when the original meets the specications for media that can be placed in the ADF, it may not feed from the
ADF or the scan quality may decline depending on the paper properties or quality.
Using Port for the Printer
e printer uses the following port. ese ports should be allowed to become available by the network
administrator as necessary.
When the Sender (Client) is the Printer
Use Destination
(Server)
Protocol Port
Number
File sending (When scan to network folder is
used from the printer)
FTP server FTP (TCP) 20
21
File server SMB (TCP) 445
NetBIOS (UDP) 137
138
NetBIOS (TCP) 139
Email sending (When scan to mail is used
from the printer)
SMTP server SMTP (TCP) 25
SMTP SSL/TLS (TCP) 465
SMTP STARTTLS (TCP) 587
POP before SMTP connection (When scan to
mail is used from the printer)
POP server POP3 (TCP) 110
When Epson Connect is used Epson Connect
Server
HTTPS 443
XMPP 5222
Control WSD Client computer WSD (TCP) 5357
Search the computer when push scanning
from Epson ScanSmart
Client computer Network Push Scan Discovery 2968
When the Sender (Client) is the Client Computer
Use Destination
(Server)
Protocol Port
Number
Discover the printer from an application such
as EpsonNet Cong, printer driver, and
scanner driver.
Printer ENPC (UDP) 3289
Collect and set up the MIB information from
an application such as EpsonNet Cong,
printer driver, and scanner driver.
Printer SNMP (UDP) 161
Forwarding LPR data Printer LPR (TCP) 515
Forwarding RAW data Printer RAW (Port9100) (TCP) 9100
Product Information > Product Specications > Using Port for the Printer
266