Epson EcoTank Pro M15180 Series - Postscript Level 3 Compatibility; Supported Third Party Services; Memory Device Specifications; Supported Data Specifications

* You need to use a device for connection that complies with IEEE802.1X.
PostScript Level 3 Compatibility
e PostScript used on this printer is compatible with PostScript Level 3.
Supported Third Party Services
AirPrint Print iOS 5 or later/Mac OS X v10.7.x or later
Scan OS X Mavericks or later
Memory Device Specications
Devices Maximum Capacities
Hard Disk Drive
*1
USB Flash Drive
2 TB (formatted in FAT, FAT32, or exFAT.)
Multi-card reader
*2
2 TB (formatted in FAT, FAT32, or exFAT)
*1: We do not recommend using external USB devices that are powered by USB. Use only external USB devices with
independent AC power sources.
*2: Only insert one memory card into the multi-card reader. Multi-card readers with more than two memory cards inserted are
not supported.
You cannot use the following devices:
❏ A device that requires a dedicated driver
❏ A device with security settings (password, encryption, and so on)
❏ A device with a built-in USB hub
Epson cannot guarantee all operations of externally connected devices.
Supported Data Specications
File Format
JPEGs (*.JPG) with the Exif Version 2.31 standard taken by digital cameras DCF
*1
version 1.0 or 2.0
*2
compliant
TIFF 6.0 compliant images as below
❏ RGB full color images (not compressed)
❏ Binary images (not compressed or CCITT encoded)
PDF Version 1.7 compliant data
le
Image Size Horizontal: 80 to 10200 pixels
Vertical: 80 to 10200 pixels
Product Information > Product Specications > Supported Data Specications
270