Epson EcoTank Pro M15180 Series - Making Contacts Available

Making Contacts Available
Registering destinations in the printer's contacts list allows you to easily enter the destination when scanning.
You can also use the LDAP server (LDAP search) to enter the destination.
Note:
❏ You can switch between your printer's contacts list and the LDAP using the printer’s control panel.
❏ You can register the following types of destinations in the contacts list. You can register up to 200 entries in total.
Email Destination for email
You need to congure the email server settings beforehand.
Network Folder (SMB) Destination for scan data
Network Folder/FTP
Contacts
Conguration
Comparison
ere are three tools for conguring the printer's contacts: Web Cong, Epson Device Admin, and the printer’s
control panel. e dierences between three tools are listed in the table below.
Features Web Cong Epson Device Admin Printer’s control panel
Registering a destination ✓✓✓
Editing a destination ✓✓✓
Adding a group ✓✓✓
Editing a group ✓✓✓
Deleting a destination or
groups
✓✓✓
Deleting all destinations ✓✓ –
Importing a le ✓✓ –
Exporting to a le ✓✓ –
Assigning destinations to
frequent use
✓✓✓
Sorting destinations
assigned to frequent use
––✓
Registering a Destination to Contacts using Web Cong
Note:
You can also register the contacts on the printer’s control panel.
1.
Access Web
Cong
and select the Scan/Copy tab > Contacts.
2.
Select the number that you want to register, and then click Edit.
Administrator Information > Settings to Use the Printer > Making Contacts Available
313