Epson EcoTank Pro M15180 Series - Backing up the Settings

Items Settings and Explanation
Maintenance box: nearing end Notice when the maintenance box is nearing full.
Administrator password changed Notice when administrator password has been changed.
Paper out Notice when the paper-out error has occurred in the specied paper source..
Printing stopped* Notice when an error occurs, such as paper jam, paper cassette unset, or
mismatch of paper size or type.
Printer error Notice when the printer error has occurred.
Scanner error Notice when the scanner error has occurred.
Wi-Fi failure Notice when the error of the wireless LAN interface has occurred.
Built-in SD card failure Notice when the error of the built-in SD card has occurred.
PDL board failure Notice when the error of the PDL substrate has occurred.
Related Information
& “Conguring Email Notication” on page 342
Backing Up the Settings
You can export the setting value set from Web Cong to the le. You can use it for backing up the contacts, setting
values, replacing the printer, etc.
e exported le cannot be edited because it is exported as a binary le.
Export the settings
Export the setting for the printer.
1.
Access Web Cong, and then select the Device Management tab > Export and Import Setting Value >
Export.
2.
Select the settings that you want to export.
Select the settings you want to export. If you select the parent category, subcategories are also selected.
However, subcategories that cause errors by duplicating within the same network (such as IP addresses and so
on) cannot be selected.
3.
Enter a password to encrypt the exported le.
You need the password to import the le. Leave this blank if you do not want to encrypt the le.
Administrator Information > Managing the Printer > Backing Up the Settings
343