Name: Epson EF-100 Series
Brand: Epson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

1. Connect the power cord to the projector's power inlet.

2. Plug the power cord into an electrical outlet.

Note: If the Direct Power On setting is turned on, the projector turns on as soon as you plug it in.

3. Press the power button on the projector or the projector remote control to turn on the projector.

The status light flashes blue as the projector warms up. After about 30 seconds, the status light

stops flashing and turns blue.

Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is

especially dangerous for children and pets.

Caution: Make sure no objects are blocking the light from the projector lens. Objects blocking the

lens for an extended time can melt and light that is reflected back into the lens can cause the

projector to malfunction.

The Welcome Guide is displayed the first time you turn on the projector. To display the guide again,

press the menu button on the projector remote control and select Settings > Display > Welcome

Guide.

Parent topic: Using Basic Projector Features

Related references

Projector Feature Settings - Settings Menu

Questions and Answers:

Need help?

Do you have a question about the Epson EF-100 Series and is the answer not in the manual?

Epson EF-100 Series Specifications

General