Name: Epson EF-100 Series
Brand: Epson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Power light Status light Laser light Temp light Status and solution

Blue Flashing blue Off Off Warming up. Wait for about 30

seconds for an image to appear. All

buttons are disabled.

Cooling down or shutting down. All

buttons are disabled.

Flashing blue Off Off Off The projector is preparing to enter

USB Power in Standby mode

Off Flashing blue Flashing

orange

Off Internal projector error. Turn the

projector off, unplug it, and contact

Epson for help.

Off Flashing blue Off Flashing

orange

A fan or sensor has a problem. Turn

the projector off, unplug it, and

contact Epson for help.

Off Flashing blue Off Orange Projector has overheated and turned

off. Leave it turned off to cool down.

After about five minutes, do the

following:

• Make sure that the vents are not

clogged with dust or obstructed by

nearby objects.

• Clean or replace the air filter.

• If operating the projector at high

altitude, turn on High Altitude

Mode.

• If the problem persists, unplug the

projector and contact Epson for

help.

Questions and Answers:

Need help?

Do you have a question about the Epson EF-100 Series and is the answer not in the manual?

Epson EF-100 Series Specifications

General