EasyManua.ls Logo

Epson EH-LS10000 - Page 98

Epson EH-LS10000
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuration Menu
97
Function Explanation
Web Control Password
Set a password to use Web Control. You can enter up to 32 single-byte alpha-
numeric characters. (* cannot be used.) Web Control is a function that allows you
to change the projector's settings by using the Web browser on a computer or
smart device connected to the network.
s p.81
Wired LAN menu
Function Menu/Settings Explanation
IP Settings
DHCP On, Off
Set whether or not (On/Off) to use DHCP. If this
is set to On, you cannot set any more addresses.
IP Address Enter the IP address assigned to the projector.
You can enter a number from 0 to 255 in each
field of the address. However, the following IP
addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255
(where x is a number from 0 to 255)
Subnet Mask Enter the projector's subnet mask.
You can enter a number from 0 to 255 in each
field of the address. However, the following sub-
net masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address Enter the projector's gateway IP address.
You can enter a number from 0 to 255 in each
field of the address. However, the following gate-
way addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255
(where x is a number from 0 to 255)
IP Address Display
On, Off Set to Off to prevent the IP address from being
displayed on the Net. Info. - Wired LAN or Web
Control screen.
Mail menu
When this is set, you receive an email notification if a problem or warning occurs in the projector.
Function Menu/Settings Explanation
Mail Notification
On, Off Set to On to send an email to the preset addresses
when a problem or warning occurs with a pro-
jector.
SMTP Server
- Enter the IP address for the SMTP server for the
projector.
You can enter a number from 0 to 255 in each
field of the address. However, the following IP
addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x
is a number from 0 to 255)
Port Number
1 - 65535 Enter the port number for the SMTP server. The
default value is 25. You can input numbers be-
tween 1 to 65535.

Table of Contents

Other manuals for Epson EH-LS10000

Related product manuals