Epson EH-LS12000B - Adjusting an Upside-Down Image; Synchronizing Image and Sound

Solving Image Problems
115
g
Position the projector close enough to the screen.
gg Related Links
• "Image Quality Settings - Image Menu" p.75
• "Input Signal Settings - Signal I/O Menu" p.77
Adjusting an Upside-down Image
If the projected image is upside-down, select the correct projection mode.
s Installation > Projection
gg Related Links
• "Projector Installation Settings - Installation Menu" p.79
Synchronizing Image and Sound
If the projected image and the output sound are not in sync, try the following
steps until the problem is solved.
a
When Image Processing is set to Fine in the projector's Signal I/O
menu, set Frame Interpolation to Off in the projector's Image menu.
b
Set Image Processing to Fast in the projector's Signal I/O menu.
c
Select the sound output settings of the video devices connected to the
projector. For details, see the documentation supplied with your video
device.