Turning Off the Projector
32
Turn off the projector after use.
a
• Turn off this product when it is not in use to prolong the life of the
projector. Light source life varies depending on the mode selected,
environmental conditions, and usage. Brightness decreases over time.
a
Press the power button on the projector or the [Standby] button on the
remote control.
The projector displays a shutdown confirmation screen.
b
Press the power button on the projector or the [Standby] button on the
remote control again. (To leave it on, press any other button.)
The light source turns off, the lens shutter closes, and the status
indicator turns off.
c
To transport or store the projector, make sure all of the indicators on
the projector are off, and then unplug the power cord.
To Next Page
Loading...
