Adjusting the Image Quality
53
• Noise Reduction
• MPEG Noise Reduction
• Super-resolution
• Auto Contrast Enhancement
e
Adjust each setting in the projector's Image menu individually as
necessary.
• To reduce flickering in images, adjust the Noise Reduction setting.
• To reduce the noise or artifacts seen in MPEG video, adjust the
MPEG Noise Reduction setting.
• To reduce blurring appeared when projecting low resolution image,
adjust the Super-resolution setting.
• To create a clearer and sharper image by automatically adjusting the
contrast, adjust the Auto Contrast Enhancement setting.
a
The settings value in the preset option are overwritten.
f
Press [Menu] or [Esc] to exit the menus.
a
You can also set the Image Enhancement setting in the projector's
Image menu.
To Next Page
Loading...
