Adjusting the Image Color
56
a
To optimize the color tone according to the scene, and to obtain a
more vivid image, correct the image by adjusting the Scene Adaptive
Gamma setting.
a
Turn on the projector and switch to the image source you want to use.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Image menu and press [Enter].
d
Select Gamma and press [Enter].
e
Select and adjust the correction value.
When you select a smaller value, you can reduce the overall brightness
of the image to make the image sharper. When you select a larger value,
the dark areas of images become brighter, but the color saturation for
lighter areas may become weaker.
f
If you want to make finer adjustments, select Custom and press
[Enter].
To Next Page
Loading...
