HDMI Link Features
61
a
• Select PJ -> Device or Bidirectional to turn the linked
device on when the projector is turned on.
• Select Device -> PJ or Bidirectional to turn the projector on
when the linked device is turned on.
• Power Off Link lets you control whether linked devices are turned
off when the projector is turned off.
a
• Power Off Link only works when the connected device's
CEC power link function is enabled.
• Note that depending on the status of the connected device
(for example, if it is recording), the device may not be
turned off.
f
Press [HDMI Link] or [Esc] to exit the menus.
You can use the projector's remote control to control the linked device such
as playback, stop, or adjust the volume.
a
You can also set the HDMI Link setting in the projector's Signal I/O
menu.
gg Related Links
• "Input Signal Settings - Signal I/O Menu" p.77
To Next Page
Loading...
