EasyManua.ls Logo

Epson EH-LS300W - Replacing the Air Filter

Epson EH-LS300W
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Air Filter and Vent Maintenance
60
e
Place the air filter with the four tabs facing down as shown.
Attention
Do not force the air filter cover to close with the tabs on the air filter facing
up. Doing so could damage the projector.
f
Close the air filter cover until it clicks into place.
Replacing the Air Filter
You need to replace the air filter in the following situations:
The air filter is torn or damaged.
a
Turn off the projector and unplug the power cord.
b
Slide the air filter cover latch and open the air filter cover.
c
Pull the air filter out of the projector.
a
Dispose of used air filters according to local regulations.
Filter frame: Polypropylene
Filter: Polypropylene, PET

Table of Contents

Related product manuals