Epson EH-LS500W - Connecting a Computer; Connecting to the LAN Port; Attaching the Wireless LAN Unit

Preparing
19
Connecting a Computer
To project images from a computer, connect to the projector using an HDMI cable (commercially available).
Connecting to the LAN Port
Connect to a network router, a hub, and so on, with a 100BASE-TX or 10BASE-T LAN cable. You can operate
the projector or check its status over a network from a computer or a smart device.
c
To prevent malfunctions, use a category 5 or higher shielded LAN cable.
Attaching the Wireless LAN Unit
When using the wireless LAN function, connect the optional Wireless LAN unit (ELPAP10) to the USB-A port.
You can use one of the following methods to project over wireless LAN. For more details, see the download
page.
•
Projecting four screens simultaneously
When using Epson iProjection (Windows/Mac), you can display up to four separate screens from the projector from
up to 50 computers connected to the network.
You can download Epson iProjection (Windows/Mac) from the following Web site.
https://www.epson.com
•
Projecting images from a mobile terminal via a network
By installing Epson iProjection (iOS/Android) on a smartphone or tablet, you can wirelessly project data on your
device.
s p.54