Basic Operations
23
Warning
•
Do not look into the lens during projection. The powerful light emitted could cause damage to eyesight. Pay
close attention to how your child behaves.
•
When using the remote control to turn it on while you are away from the projector, make sure no one is
looking into the lens.
•
Do not stand in front of the lens during projection. Clothes could be damaged due to the high temperature.
c
•
This projector provides a Child Lock function to prevent children from accidentally turning the power
on and a Control Panel Lock function to prevent accidental operations and so on.
s Settings - Lock
Setting - Child Lock/Control Panel Lock p.61
•
When using at an altitude of 1500 m or more, set High Altitude Mode to On. s Extended - Operation -
High Altitude Mode p.63
If the target image is not projected
If the image is not projected, you can change the source using one of the following methods.
Remote control Control panel
Press the source button and select the target port. Press the [Source] button and select the target port.
c
•
If you press the [Home] button on the control panel, you can also make settings from the Home screen.
s p.24
•
You can also display the Home screen by using the home button on the remote control.
To Next Page
Loading...
