Functions for Enhancing Projection
19
Changing the Aspect Ratio
When you connect video equipment and project images that have been
recorded in digital video or onto DVDs in 16:9 wide-screen format,
change the aspect ratiog. Changing the aspect ratio is also required when
you want to project computer images at full size.
Switching methods and types of aspect ratio are as follows.
f Switching methods
Each time you press the button, the aspect name is displayed on the screen
and the aspect changes.
If you press the button while the aspect name is displayed on the screen, it
changes to the next aspect mode.
q
• Audio does not stop.
• The image source continues to play back the moving
images even while the screen is frozen, so it is not possible
to resume projection from the point where it was paused.
• If the [Freeze] button is pressed while the configuration
menu or a help screen is displayed, the menu or help
screen being displayed is cleared.
• Freeze still works while E-Zoom is being used.
Procedure
q
This can also be set using "Aspect" from the "Signal"
menu in the configuration menu.
s
p.32
To Next Page
Loading...
