Epson EH-TW5650 - Page 38

Adjusting the Image
37
Frame Interpolation is available under the following conditions.
•
When Image Processing is set to Fine. s Signal - Advanced - Image Processing p.66
•
When the source is HDMI1 or HDMI2.
•
When inputting 2D signals or 3D signals (1080p 24 Hz). s p.99
a
Press the button.
c
You can make settings from the
Configuration menu.
s Image -
Frame Interpolation p.65
b
Use the buttons to
select the item, and then press the
button to confirm the selection.