Part Names and Functions
7
Control Panel
Name Function
A
[Power] button Turns the projector power on or off.
s Quick Start Guide
B
[Source Search]
button
Changes to the next input source that is
connected to the projector and is sending an
image.
s p.13
C
[Enter] button If pressed during projection of computer signal
images, it automatically adjusts the tracking,
synchronization, and position to project the
optimum image. When a configuration menu or
a help screen is displayed, it accepts and
enters the current selection and moves to the
next level.
s p.31
G
D
HF
CB
EIA
D
[v] [w] buttons Corrects keystone distortion.
If pressed when a configuration menu or a help
screen is displayed, these buttons select menu
items and setting values.
s Quick Start Guide, p.31
E
[Help] button Displays and closes the help screen which
shows you how to deal with problems if they
occur.
s p.41
F
[Esc] button Stops the current function.
If pressed when a configuration menu is
displayed, it moves to the previous menu level.
s p.31
G
[a] [b] buttons Adjusts the sound volume.
If pressed when a configuration menu or a help
screen is displayed, these buttons select menu
items and setting values.
s Quick Start Guide, p.31
H
[Menu] button Displays and closes the configuration menu.
s p.31
I
Status indicators The colour of the indicators and whether they
are flashing or lit indicates the status of the
projector.
s p.42
Name Function
To Next Page
Loading...
