Connecting to a Computer
■ ■ ■ ■ ■
15
3. Connect the small terminal of the Macintosh desktop
adapter to the other end of the computer cable.
4. Connect the computer cable (with the Macintosh desktop
adapter attached) to the video-out port on your
Macintosh.
Connecting the Mouse Cables
If you want to use the remote control as a mouse, you need to
connect the U SB mouse cable.
♦
Note:
The USB m ouse port on the projector can only be used by
connecting a USB mouse. It is not possible to connect other USB
equipment for use.
Refer to this illustration while following the steps below.
USB mouse cable
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
