■ ■ ■ ■
18
♦
Note:
Some new PowerBooks may allow you to connect the
computer cable directly to the com puter without using a
video-out cable. See your PowerBook manual for additional
information on connecting a computer cable.
1. Connect one end of the computer cable to the projector’s
Computer port.
2. Remove the small cover on the Macintosh desktop adapter
and set its DIP switches in accordance with the resolution
you want to use (such as 16-inch mode). See your
Macintosh documentation for instructions.
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
