Connecting to a Computer
■ ■ ■ ■ ■
21
2. Connect the other end of the U SB mouse cable to the
mouse port on the back of the PowerBook.
Connecting the Audio Cable
1. If you will be using audio, connect one end of the audio
cable to the Audio In jack on the projector.
2. Connect the other end of the audio cable to the audio-out
port on your PowerBook.
♦ Note: A fter you turn on the projector and computer, you’ll need
to choose Mirroring in the Display Control Panel if you set up
your configuration to display on the LCD screen as well as the
projector screen.
Audio In jack
audio cable
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
