Epson EMP-S4 - Removing the Lamp Duct and Lamp Fan B

4-29
EMP-S4
SEIKO EPSON Revision:B
4.2.16 Removing the Lamp Duct and Lamp Fan B
1. Remove the two (C.B.P-TITE SCREW, 3x10, F/ZB-3C) screws that secure the Lamp Duct,
and remove the Lamp Duct.
2. Remove the Lamp Fan B from the Lower Case.
Figure 4-31.
Lamp Duct
Lamp Fan, B