Epson EMP-S5 - Page 68

To Next Page

To Previous Page

4-19

EMP-822/EMP-83/EMP-X5/EMP-S5

SEIKO EPSON Revision:A

4.3.4.2. Removing the Shutter Switch

1. Remove the screw (C.B.P-TITE SCREW,3X8,F/ZN-3C) that secures the Shutter Frame,

and remove the Shutter Frame from the Upper Case Unit carefully not to lose the Shutter

Spring and the Shutter Ball.

2. Remove the following parts from the Upper Case Unit.

• Shutter Ball

• Shutter Spring

• Shutter A

3. Remove the screw (C.P.TYPE1 B-TITET-A.SCREW,2X6,F/ZB-3C) that secures the

Shutter Switch, and remove the Shutter Switch from the Shutter Frame.

Figure 4-12.

When carrying out the following steps, be careful not to lose the Shutter Ball, and

the Shutter Spring.

C.P.TYPE1 B-TITET-

A.SCREW,2X6,F/ZB-3C

Shutter Switch

Shutter Frame

Shutter Ball

Shutter A

Shutter Spring

Upper Case Unit

Other manuals for Epson EMP-S5