Epson EMP-S5 - Page 91

4-42
EMP-822/EMP-83/EMP-X5/EMP-S5
SEIKO EPSON Revision:A
 Removing the Focus Ring (EMP-S5’s case)
1. Remove the four screws (C.P.(S-P1)SCREW,3X10,F/ZN-3C) and the four nuts (H.N.-
3,F/ZN-3C) that secure the PROJECTION LENS, and the PROJECTION LENS.
2. Remove the two screws (C.P.TYPE1 B-TITET-A.SCREW,2X6,F/ZB-3C) that secure
the Focus Ring, and remove the Focus Ring.
Figure 4-39.
Optical Engine
Focus Ring
EMP-S5’s case