Epson EMP-S5 - Page 94

4-45
EMP-822/EMP-83/EMP-X5/EMP-S5
SEIKO EPSON Revision:A
• Route the cable of the Lamp Fan under the Intake Duct.
Figure 4-43.
 When installing the Inner Exhaust Duct A, check the following.
• The Lamp Connector is secured to the notch of the Inner Exhaust Duct A.
• The Safety Switch is secured to the notch of the Inner Exhaust Duct A.
Figure 4-44.
Intake Duct
Lamp Fan
Lamp Connector
Safety Switch
Inner Exhaust Duct A