3.
Type the following and press
AVGA2D.EXE
This command loads a protected-mode TSR driver for
VersaCAD 2D. When the program is loaded, you see this
message:
4.
Make a copy of the original VersaCAD 2D configuration file,
ENVIRO.CFG,
and name the copy
ENVIRO.OLD.
5.
Use a text editor or word processing program that can save a
file in ASCII format to edit the
ENVIRO
.
CFG
file. Add the
following statements at the end of the screen parameters
section:
6.
Type
ENVIRO.
EXE and press . You’ll see a
configuration menu.
7.
Select
[S] Screen Configuration.
8.
Press
the space bar or until you see the following:
Cirrus Logic GD540x, GD542x, 800x600
44 VGA Utilities
To Next Page
Loading...
