41
2. Bundle the cables together using a band or other fastener (not provided) and pass it through the
cable holder as shown.
Caution: Do not bundle the power cord to the other cables. Otherwise, a fire may occur.
3. Carefully replace the side cover.
Note: The projector's side cover can be split into two parts. Remove side cover B to allow more
space for connected streaming devices and cables.
Parent topic: Setting Up the Projector
Installing Batteries in the Remote Control
The remote control uses the two AAA batteries that came with the projector. Replace the batteries as
soon as they run out.
To Next Page
Loading...
