Epson EPL-6200 - Page 170

EPSON EPL-6200/EPL-6200L Revision A
Adjustment Feed Registration Adjustment 170
4. Specify the port of the PC in the [Port] list box, to which the target printer is connected.
As a default, “Auto Selection” is specified and the program automatically search for
the port with the target printer connected. You can manually select the port by clicking
[Browse] button to view all available ports.
5. Click on [OK] button and the window shouwn below is appear on the screen.
6. Click on [Print] button to print a test pattern chart. Take a printed chart and measure
the distance from the leading edge of paper to a specified check point on the pattern
(see figure below).
The feed registration position: 9.82 ± 0.23 mm (10.05 - 9.59mm)
9.82 mm