Epson EPL-6200 - Using the Printer Driver

EPSON EPL-6200/EPL-6200L Revision A
Product Description Control Panel (EPL-6200L) 47
1.6 Control Panel (EPL-6200L)
1.6.1 External Appearance and Names of Parts
Figure 1-20. Control Panel of EPL-6200L
 Meaning of LED Flashing on EPL-6200L
Note 1: The both two LEDs lights for a while when printer power turned on.
2: During Checking RAM Ready LED flash. (Interval time: On: 0.1sec Off: 0.1sec)
(But the time of checking RAM is very short, then the flashing may not visible.)
3: Interval time
Flashing1: On 0.3sec, Off 0.3sec
Flashing3: On 0.6sec, Off 2.4sec
Table 1-50. Buttons and LEDs of EPL-6200L
No. Name Note
1 Ready LED Color: Green
2 Error LED Color: Red
1
2
Table 1-51. Meaning of LED Flashing
Ready LED Error LED Supplement Meaning
Off Off - Power off
On Off - Ready to print (It include warning status)
Blink 1 Off -
Moving to Ready status.
Warming up, receiving data is included.
Blink 3 Off -
Warning for consumables
Non genuine consumables warning
Off Blink 1 - –
Blink 1 Blink 1
Green and red blink
alternately
Engine Error
It is a service call error.
Blink 1 Blink 1
Green and red blink
simultaneously
RAM check error (RAM is not installed.)
Blink 1 and
Off
Blink 1
1. Green: On, Red: On
2. Green: Off, Red: Off
3. Green: Off, Red: On
4. Green: Off, Red: Off
5. Return to pattern 1
It is a service call error except or Engine
Error.
Ex) IPL Error
On Blink 1 -
Recoverable Errors by Status Monitor.
Ex.) Underrun Error Replace paper error
Off On -
Controller Error It is a service call error.
Ex.) Video Error
Data Expansion Error
EEPROM Access Error
Software Error
Blink 1 On -
Protocol Error
It will be fixed after you turn it power off.
On On -
Recoverable Errors without power off.
Ex) Cover Open
Paper jam (Paper Out)