Network Software 128
Network Guide
Time
Manual Settings
If the network interface has RTC (Real Time Clock), you can set the time manually.
Time Server Settings
Items Explanations
Time Displays the time. Click the Get Time button to reload the
display. When Time Server is Enable, time is acquired from
the time server.
Items Explanations
Date Enter the year, month, and day.
Time Enter the hour, minutes, and seconds.
Time Difference Enter the difference between time at the present location
and Greenwich Mean Time (GMT).
Apply button Applies the settings.
Items Explanations
Time Server Select either Enable or Disable to time synchronize from
the time server.
Time Server Address Enter the address of the time server.
Synchronize Interval Enter the time interval in minutes for automatic time
synchronization.
Time Difference Enter the difference between time at the present location
and Greenwich Mean Time (GMT).
Time Server Status Displays a connection status with the time server.
Apply button Applies the settings.
To Next Page
Loading...
