Epson EPL-N4000 - Page 163

EPSON EPL-N4000/EPL-N4000+ Chapter 4 Disassembly and Assembly
Rev.B 149
11. Reinstall the Option Connector Bracket to the frame, and use one
screw to secure the Bracket.
12. Reconnect P403, P404, P406, and P408 to the MCU PWB.
13. Reinstall the dockin
g
clip to Tray 2, and use one screw to secure the
clip.
14. Reinstall the dockin
g
stud located at the lower ri
g
ht of the Tray, and
use a retainin
g
clip to secure the stud.
15. Reinstall the MSI Support Assembly. (“MSI Support Assembly” on
pa
g
e -166)
16. Reinstall the Rear Cover Assembly. (“Rear Cover Assembly” on
pa
g
e -140)
17. Reinstall the Left Upper Cover Assembly.
18. Reinstall Tray 1 and Tray 2.
19. Reinstall the EP Cartrid
g
e. (“EP Cartrid
g
e (Toner Cartrid
g
e)” on
pa
g
e -192)
20. Reinstall the Duplex Unit, if one was installed.