Epson ET-14000 - Page 53

2016/08/25
Revision: 2 Page: 53
***The parameter using high speed black printing in color non M/W mode.
Black mode (using each 180 nozzles)
This black print mode uses 180 full nozzles of each black head.
Color mode (1) (using column A black nozzle)
(using each 60 nozzles. But, for color data, each of the first nozzle data must be zero.)
Color image print (Total 240 nozzles = MAX size)
Color mode (2) (using column B black nozzle)
(using each 60 nozzles. But, for color data, each of the first nozzle data must be zero.)
Color image print (Total 240 nozzles = MAX size)
#1
#180
HEAD
r=00H (black)
r=40H (black2)
Data start point (d1) Data start point (d1)
Data end point (dk) Data end point (dk)
#120
HEAD
r=00H (black)
r=04H (yellow)
#180
#60
Data start point (d1)
Data end point (dk)
Data start point (d1)
Data end point (dk)
r=01H
r=02H (cyan)
#1
#60
#2
#61
#62
#120
#121
#122
#180
Zero data
#12 0
HEAD
r=40H (black2)
r=04H (yellow)
#18 0
#60
Data start point (d1)
Data end point (dk)
Data start point (d1)
Data end point (dk)
r=01H
r=02H (cyan)
#1
#60
#2
#61
#62
#120
#121
#12 2
#180
Zero