Epson ET-14000 - Set Print Method ID ESC

2016/08/25
Revision: 2 Page: 58
5.1.32 Set Print method ID ESC (m n
ESC (m n Ver 1.00
[Name] Set Print method ID [Setting]
[Format] 1BH, 28H, 6DH, n
[Function] 1) The print mode is selected according to the values of n.
2) If n have a value other than those above, this command is ignored.
3) This command is only effective in graphics mode.
4) The value of setting refers to CHAPTER3.
[Initial State] -
[Related Commands]
[Setting] Commands whose settings are affected by this command.
None
[Setting] Commands that change the effects of this command.
The ESC @ command selects black.
[Operation] Commands whose functionality is affected by this command.
None
[Operation] Commands that change the effects of this command.
The ESC (G command puts the printer in graphics mode.