150
You see this screen:
5. Scroll down and select Fax Setting Wizard.
6. Select Start.
You a Fax Header screen like this:
7. Use the displayed keypad to enter the sender name for your fax source, such as your name or a
business name. You can enter up to 40 characters. Select when you are done.
8. Use the displayed keypad or the buttons on the product to enter your fax number, up to 20
characters. Press when you are done.
9. On the Distinctive Ring Setting screen, do one of the following:
• If you have subscribed to a distinctive ring service from your telephone company, select Proceed.
Then, select the ring pattern to be used for incoming faxes. Go to step 12.
• If you do not have distinctive ring service, select Skip, then go to the next step.
To Next Page
Loading...
