Epson ET-2750 series - Paper Feeds at a Slant; Several Sheets of Paper Are Fed at a Time; Paper out Error Occurs; Power and Control Panel Problems

Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 39
Several Sheets of Paper are Fed at a Time
❏ Load one sheet of paper at a time.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the printer before you reload the paper.
Paper Out Error Occurs
When a paper out error occurs although paper is loaded in the rear paper feed, reload paper in the center of the
rear paper feed.
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P button for a little longer.
Power Does Not Turn O
Hold down the P button for a little longer. If you still cannot turn o the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it
o
by pressing the
P button.
Power Turns
O
Automatically
❏ Select Power O Settings in Settings, and then disable the Power O If Inactive and Power O If
Disconnected settings.
❏ Disable the Power O Timer setting in Settings.
Note:
Your produc t may have the Power O Settings or Power O Timer feature depending on the location of purchase.
User's Guide
Solving Problems
130