Epson ET-2750 series - Disconnecting Wi-Fi Direct (Simple AP) Connection from the Control Panel; Restoring the Network Settings from the Control Panel

Disconnecting Wi-Fi Direct (Simple AP) connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specic device, disconnect from the device
instead of the printer.
1. Select Settings on the home screen.
To select an item, move the focus to the item using the
u d l r buttons, and then press the OK button.
2. Select Network Settings.
3.
Select Wi- Fi S e tu p .
4. Select Wi - F i D i r e c t S e t u p .
5. Select Disable Wi-Fi Direct.
6. Check the message, and then press the OK button.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1. Select Settings on the home screen.
To select an item, move the focus to the item using the
u d l r buttons, and then press the OK button.
2. Select Restore Default Settings > Network Settings.
3. Check the message, and then press the OK button.
User's Guide
Network Settings
36