Related tasks
Selecting the Line Type
Related topics
Placing Originals on the Product
Setting Up Contacts Using the Product Control Panel
Fax Send Settings
While sending a fax, you can select these options.
Setting Options Description
Resolution Standard Adjusts the scan resolution and print quality for
outgoing faxes.
Fine
Photo
Density Various density Lets you select from various density levels to adjust
levels the darkness of outgoing faxes.
Direct Send Off Sends monochrome faxes to a single recipient as
soon as the connection is made, without saving the
On
scanned image to memory. You cannot use this
feature when sending a color fax or sending to
multiple recipients.
Transmission Report Print on Error Lets you select when to print transmission reports.
Print
Do Not Print
Send Fax Later Off You can set to send a fax at a specified time. Only
monochrome faxes can be sent when the time to
On
send is specified.
Polling Receive Off You can receive a fax stored on another fax machine
for fax polling by dialing the fax number. You can
On
receive a specific document from a fax information
service by following the audio guidance of the
service.
171
To Next Page
Loading...
