A
Rear paper feed slot ❏ You can load a single sheet of all types of supported paper.
❏ You can also load thick paper (up to 0.6 mm thick) and pre-punched
paper, which cannot be loaded in the paper cassette. However, even if the
thickness is within this range, some paper may not be fed correctly
depending on the hardness.
❏ Load paper when a message is displayed on the control panel telling you
to load paper.
B
Paper cassette 1 ❏ You can load multiple sheets of small size photo paper.
❏ If you load the same paper in paper cassette 1 and paper cassette 2 and
select Cassette 1→2 as the Paper Source Setting setting in the print
settings, the printer automatically feeds paper from paper cassette 2
when paper runs out in paper cassette 1.
C
Paper cassette 2 We recommend loading A4 size plain paper as this is used frequently.
Related Information
& “Loading Paper in the Paper Cassette 1” on page 61
& “Loading Paper in the Paper Cassette 2” on page 64
& “Loading Paper in the Rear Paper Feed Slot” on page 69
Loading Paper in the Paper Cassette 1
1. If the output tray is extended, tap to close it.
2.
Raise the control panel.
3. Open the front cover until it clicks.
User's Guide
Loading Paper
61
To Next Page
Loading...
