Front Sheet Guide
The optional front sheet guide fits inside the front of the printer.
It handles single sheets that are 148-257 mm (5.8-10.1 inches) wide
for the standard-width printer or 148-364 mm (5.8-14.3 inches) wide
for the wide-carriage printer from the front paper slot.
Installing the front sheet guide
Install the front sheet guide following the steps below:
1.
Open the front cover; then remove the tractor unit, if installed.
2.
Fit the plastic mounts on the guide into the mounting notches on
the printer, as shown below.
Using the Printer Options
4-25
To Next Page
Loading...
